隧道与横通道交叉角对火灾烟气蔓延影响机制研究

为探索隧道与横通道交叉角对火灾烟气蔓延的影响机制，采用FDS数值模拟，研究横通道与隧道不同交叉角情况下火灾烟气温度、浓度、烟气层高度等的变化规律，建立开启火源下风向横通道时隧道内烟气最高温度修正公式，提出烟气纵向蔓延恢复长度的概念，并探讨其影响规律。 结果表明:隧道和横通道交叉角越小，隧道内同一位置烟气层高度越高，当交叉角由90°降低到30°时，烟气层高度最大增加32%；烟气纵向蔓延恢复长度与交叉角及通风速率呈正相关，而与火源功率几乎无关。研究结果对隧道通风排烟系统设计及相关标准的制定具有参考意义。     

基于ALOHA软件的某化工厂选址合理性评估

为了研究化工厂选址的合理性,以山东省某化工厂为例,采用ALOHA(有害大气空中定位软件)模拟软件定量确定厂区内环氧乙烷毒气扩散事故的影响区域和敏感点毒气浓度,结合GoogleEarth地图对影响范围进行实地拟合。结果表明化工厂的环氧乙烷储罐泄漏后,毒气扩散到厂区范围之外,毒气浓度在50~500ppm之间的重伤区(ERPG-2)扩散距离可达1.7km,对周围居民的人身安全构成严重威胁;厂区应根据拟合结果重新规划工厂中环氧乙烷储罐的位置;ALOHA软件对化工厂选址评价提供了新的手段。     

走向工作面贯通上山与支架快速回撤技术

针对走向工作面停采线与上山之间的护巷煤柱造成煤炭损失，支架回撤工艺复杂、巷道掘进量大等问题，提出走向工作面贯通上山与支架快速回撤技术。工作面贯通采区上山，利用上山回撤支架。在贯通前，利用压力拱模型分析剩余煤柱应力变化规律，并结合极限平衡区公式，确定让压煤柱为8 m；对贯通前基本顶合理断裂位置、让压调节机制、末采阶段采高进行了分析确定，并采取上山巷内补强支护及挂绳铺网措施。贯通上山后，首先利用支架对上山留巷，完成留巷后，利用上山回撤支架，先将上部端头3架逆时针旋转90°作为掩护架，在对剩余支架逐架回撤时，3个掩护架呈现台阶型。提出的技术取消了护巷煤柱及回撤通道，提高了煤炭采出率，减少了巷道掘进量，简化了回撤工艺。     

A product analysis-based study on the mechanism of inflammable gas explosion suppression

To study the mechanism of the suppressing effect of Expanded Aluminium (EA) on the premixed gas explosion, premixed methane-air and propane-air gases were undergone explosion reaction in the presence of EA in a self-designed closed pipeline with the overpressures and the compositions, rates and sensitivities of products analyzed. The results showed that the 9.5% methane-air and 5% propane-air explosions produced peak pressures decreased by 79.3% and 65.6%, and residual methane and propane contents increased by 270% and 560% respectively than without EA. In addition, the results revealed that the explosions of propane in the presence of EA produced less methane and carbon oxides contents, but more ethylene and propylene contents. The simulation showed that H, O, and OH are the key factors affecting the rate of products. The product compositions, together with other parameters, suggested that EA decreased temperature, inhibited chain initiation and propagation reaction, but facilitated chain termination reaction by advancing and accelerating the gas phase and wall destruction reaction of radicals, especially collisions and concentration of key free radicals. This new research method based on the analysis of explosion products can be used for in-depth research into gas explosion features and shed light on the suppressing mechanism of EA in flammable gas explosion.     

Validation of the Polish version of the World Health Organization Disability Assessment Schedule (WHODAS 2.0) in an elderly population (60–70 years old)

Purpose. To assess the reliability and validity of the Polish version of the 36-point World Health Organization Disability Assessment Schedule (WHODAS 2.0) in an elderly population. Method. One thousand randomly selected individuals, aged 60–70 years, living in south-eastern Poland were assessed using the Polish version of the WHODAS 2.0. Results. The analysis confirmed the high reliability and validity of the tool. Cronbach’s α index was 0.89. The tool had high stability, and the correlation between test and retest results was high. The relevance of the domain selection was high or very high. A factor analysis confirmed the relevance of assigning questions to domains. High theoretical relevance was also demonstrated. Statistically significant differences between those who were and were not suffering from health problems were observed. An analysis of the internal structure of the WHODAS 2.0 revealed strong correlations between the components of each domain and the final result. Conclusion. The Polish version of the WHODAS 2.0 showed high reliability and validity; thus, it can be used to assess health, functioning and disability in the elderly population of Poland.     

基于SVM的矿井通风阻力系数影响因素分析与预测

矿井通风阻力系数是通风安全最重要的基础参数之一，为了实现矿井通风阻力系数简单准确地预测，提出了利用支持向量机（SVM）来预测矿井通风阻力系数的方法。通过分析影响因子与矿井通风阻力系数的相关性关系，并利用MATLAB逐步建立单影响因素与矿井通风阻力系数、多影响因素与矿井通风阻力系数之间的SVM预测模型，对比分析各预测模型的相对误差，确定最佳矿井通风阻力系数预测模型，即当输入模型影响因素为巷道断面积、周长和支护方式时，预测相对误差小于10%的样本数占测试样本的76%，相对误差小于20%的样本数占测试样本的90%。结果表明:该预测方法在矿井通风阻力系数预测中是可行的，并具较高的准确性。     

我国污染物总量控制制度改革的思考

污染物总量控制制度是我国环境保护制度的重要组成部分。结合污染物总量控制制度的实施现状,分析实施过程中减排基数、核算体系、责任主体等方面存在的问题。提出,改革现行污染物总量控制制度,将总量控制与改革中的排污许可制相融合,落实企业主体责任,将总量指标与环境质量改善挂钩,建立差异化的减排核算体系,并加强日常监管,达到改善环境质量的目标。     

600 MW机组低压转子叶片裂纹分析

针对某台600 MW亚临界参数汽轮机低压转子的末三级叶片(2Cr12NiMo1W1V钢)出汽侧裂纹进行了宏观形貌观察、化学成分分析、金相组织分析、室温冲击韧性试验、硬度试验，并对断口进行了扫描电镜及能谱分析。结果表明：此次开裂的低压转子叶片，是由于其化学成分Mo元素含量低于标准要求，导致材料的KISCC降低，以及硬度偏低造成裂纹扩展所需的外界启动应力降低，进而在运行过程中拉应力和湿蒸汽的氧化腐蚀共同作用下，发生了应力腐蚀开裂。     

电袋复合除尘器设计若干问题的探讨

介绍了电袋复合除尘器设计过程中烟气量的核实方法、电区与袋区分级效率的确定原则、电区与袋区主要技术参数的确定方法、滤料选取、气流分布要求等内容，对电袋复合除尘器的选择与设计具有一定的参考作用。     

300MW燃煤锅炉机组超细颗粒聚并器的实验研究

为了解决燃煤锅炉烟气中超细颗粒难以脱除的问题,基于流体动力学原理设计了一种超细颗粒聚并器,并在300 MW燃煤锅炉机组电除尘器的前置烟道中进行了实验研究。结果表明,聚并器内部存在超细颗粒之间以及超细颗粒与大颗粒之间的相互聚集行为,从而使超细颗粒数量显著减少。例如,对于粒径在2.65和10.48μm以下的颗粒,其体积比例在聚并器出口分别减少了56.7%和62.3%,在电除尘器出口的粉尘浓度减少了26.34 mg/Nm3,这表明,基于流体动力学原理的聚并器对超细颗粒的聚并作用明显,具有良好的应用前景。